Siemens SIMATIC Field PG M6 Operating Instructions Manual Download Page 40

Page: 40 / 120

Commissioning the device

5.2 Initial startup: Commissioning the operating system

SIMATIC Field PG M6

Operating Instructions, 12/2018, A5E43198909-AA

Commissioning of the installed Windows® operating system

NOTICE
Operational reliability of the device and the plant is at risk
Incorrect or aborted commissioning of the operating system can put the operational

reliability of your device and the plant at risk.
Observe the following:

•

Do not switch off the device at any time during commissioning of the device.

•

If commissioning is aborted or is done incorrectly, you must restore the operating

system with the supplied Restore DVD set to achieve full operational reliability. You can

find additional information on this in Restoring operating system and partitions

(Page 70).

Switch the device on.

The operating system is set up automatically. The device may restart multiple times

during this process.

Wait until you are prompted to select the language.

Type in the product key if required. The product key is located on the "Certificate of

Authenticity" label on the device or on an enclosed "Certificate of Authenticity Card".

Follow the rest of the instructions on the screen.
Once the user has logged on for the first time and the Windows® user interface has

loaded, commissioning of the operating system is complete.

Summary of Contents for SIMATIC Field PG M6

























































































































Search results

Summary of Contents for SIMATIC Field PG M6

Reviews:

Related manuals for SIMATIC Field PG M6

Brands by name

Popular brands

Siemens SIMATIC Field PG M6, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC Field PG M6

Reviews:

Related manuals for SIMATIC Field PG M6

Brands by name

Popular brands