manualshive.com logo in svg

Siemens SIMATIC CN 4100, Equipment Manual, Page: 61 / 76

Share
Download
Siemens SIMATIC CN 4100 Equipment Manual Download Page 61

General industry standards

The SIMATIC CN 4100 communication system is designed to meet or exceed most general 
industry standards. These are in particular:

• Power input on shielded and unshielded signal lines: 

IEC 61000-4-6 (Ed. 4.0 2013-10 + corr. 1:2015); EN 61000-4-6 (2014-02); DIN EN 61000-4-6 
(2014-08) 

• Immunity testing, high frequency electromagnetic field: 

IEC 61000-4-3 (2008-04+A2:2010-03); EN 61000-4-3 
(2006-05+A1:2008-02+A2:2010-07); DIN EN 61000-4-3 (2011-04). 

• Measurement of conducted emissions on telecommunication lines: 150 kHz - 30 MHz: 

EN 55016-2-1:2009-03+A1:2011-04+A2:2013-05 (CISPR 16-2-1). 

• Burst – Immunity of shielded signal lines: 

IEC 61000-4-4 (2012-04); EN 61000-4-4 (2012-11); DIN EN 61000-4-4 (2013-04). 

• ESD - Electrostatic discharge: 

IEC 61000-4-2 (2008-12 ed. 2); EN 61000-4-2 (2009-03); DIN EN 61000-4-2 (2009-12) 

• Interference emission measurement: 

30 MHz - 1 GHz according to EN 55016-2-3:2010 (CISPR 16-2-3) 
1-6 GHz according to EN 55016-2-3:2010 (CISPR 16-2-3)

10.1.3

UKCA marking

Importer UK:

Siemens plc

Manchester M20 2UR

10.1.4

cULus approval

Introduction

The cULus approval applies to: 

• Rack

• CPU modules

Definition

R

Technical specifications

10.1 Standards and approvals

CN 4100 Communication System
Equipment Manual, 10/2021, A5E50871363-AA

61

Summary of Contents for SIMATIC CN 4100













































































Reviews:

No comments