manualshive.com logo in svg

Siemens SIMATIC CN 4100, Equipment Manual, Page: 12 / 76

Share
Download
Siemens SIMATIC CN 4100 Equipment Manual Download Page 12

①

Rack:

Contains slots for the CPU modules and communications 
modules. 
Contains terminal points.

②

CPU modules:

Can be installed individually or as a redundant pair. CPUs 
are plugged into the rack.

③

Communications modules:

Optional modules with additional functions. These can al‐
so be installed individually or as a redundant pair. Com‐
munications modules are plugged into the rack.

3.3

Basic components of the system

3.3.1

Rack with 4 slots

Definition

The core component of the SIMATIC CN 4100 communication system is the rack.

The four-slot rack provides the following:

• Two slots for CPU modules. 

– Redundant operation: Two CPUs. 

– Simple operation: A CPU in the first slot.

• Two slots for communications modules.

• Power supply connections

• Network connections

Design of the front panel

The following figure shows the front panel of the rack:

System overview
3.3 Basic components of the system

CN 4100 Communication System

12

Equipment Manual, 10/2021, A5E50871363-AA

Summary of Contents for SIMATIC CN 4100













































































Reviews:

No comments