Configuration
4.10 Data points
SIMATIC CC712
Operating Instructions, 05/2019, C79000-G8976-C503-01
83
1 .. 999 min
1 .. 27 h
–
Once daily
The value is transferred once a day at the configured time.
–
Once weekly
The value is transferred once a week.
–
Once monthly
The value is transferred once a month.
If a month has fewer days than the day specified in the configuration, the value of the
data point is transferred at the end of the month.
●
Threshold value trigger
Select the type using the drop-down list and add the respective values.
The value ranges of the threshold triggers depend on the data type of the data point.
–
Deviation
The value is transferred as soon as it changes compared to the value that was read in
before.
–
Area outside
The value is transferred as soon as it is outside the configured area.
–
Area within
The value is transferred as soon as it is inside the configured area.
–
Threshold HIGH
The value is transferred as soon as it exceeds the configured value.
–
Threshold LOW
The value is transferred as soon as it drops below the configured value.
Note:
The range of values of the station data point is converted to the range of values of the
device data point.
Data types
Not every data type supports all trigger types. The table lists the configurable data types and
specifies the supported trigger types for each data type.
The tag <DATAPOINT_TYPE> specifies the data type of the transferred values when
publishing the user data to the cloud, see section User data format (Page 71).
●
x : Supported
●
- : Not supported
