Configuration
4.9 Cloud configuration
SIMATIC CC712
66
Operating Instructions, 05/2019, C79000-G8976-C503-01
●
Imported client certificate
After saving, shows the name and path of the last imported certificate.
In case of a new import, an existing certificate is deleted and overwritten with the new
certificate.
●
Import private key
Shows the name of the selected key file in the file system.
●
Imported private key
Shows the name and path of the last imported key.
●
Key password
Enter the password (optional) for the private key.
4.9.2.4
Device parameters
The tab is only relevant for the connection to MindConnect IoT Extension.
After the establishment of a connection between the device and MindConnect IoT Extension,
the two parameters are used for the identification of your device and for the exchange of key
material during the Onboarding process.
●
Device Name
Here you enter the name under which the device is registered for the Onboarding
process.
The Device name is displayed in MindConnect IoT Extension at the following location:
Device > Device profile > "NAME"
●
Device Type
The parameter is required in MindConnect IoT Extension to determine the device type.
Enter the following string:
–
c8y_MQTTDevice
The Device type is displayed in MindConnect IoT Extension at the following location:
Device > Device profile > "Type"
You can find additional information on setting up the IoT Extension on the Internet at:
Link: (
https://support.industry.siemens.com/cs/ww/en/ps/25621
4.9.3
Topic editor
4.9.3.1
Topic settings
In this tab, you create the topics or groups for transfer to the broker for the enabled profile.
For configuration of the profile, refer to the section Profile (Page 60).
For structuring the data in topics or groups and configuring the topic names, refer to the
section Notes on structuring data (Page 59).
