Welcome to the SIMATIC Box PC 620
2-9
SIMATIC Box PC 620 Manual
A5E00131465-03
2.6.3
CD ROM or DVD-ROM/CD-RW Drive
Depending on the device equipment, a CD-ROM or a DVD-ROM/CD-RW drive is
fitted in the SIMATIC Box PC 620. The fitting depth of the PC is increased by
20mm as a result.
Operation
When the open/close button is pressed, the tray is travelled out with a slight delay.
Insert the data medium with the labelling facing forwards into the tray. The tray is
retracted automatically, when the tray is pressed briefly or the the Open/Close
button is pressed.
By briefly pressing the eject button, the drawer springs out slightly. You can
remove the data medium.
Emergency removal
When the device ist switched off, the disk can be forced out by using a pin (for
example, a opened up paper clip).
Notice
After the drawer has been closed, the data medium is tested and the access
display light on the drive starts to flash:
– If the access LED flashes continually, the data medium is faulty but can still
be read,
– If the access LED flashes several times and then remains lit, the data
medium you have inserted is defective and cannot be read.
– normally the access LED is lit when reading the data medium.
Caution
Drives are sensitive to vibrations and shock. Any vibrations occuring during
operation can lead to damage to the drive or data medium.
The burning operation with the CD/DVD drive is only permissible under an
ambient temperature b5
C and +40
C.
Additional Software
To be attain the full functionality of the DVD-ROM/CD RW drive, additional
software (DVD player or burner software) is necessary. You can find it on the CD
included in the delivery of the device. To install the software place the CD in the
drive and follow the instructions on the screen.
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
+86-755-8660-6182
