s
SICAM SGU Devices
7XV5676
Product Information
E50417-B1050-C554-A4, Edition 03.2015
9
Repair
CAUTION
Danger of damage due to static electrical charges
The user is not authorized to repair the device when it is defective. This
is because the device contains special electronic components that may
only be handled by the manufacturer in compliance with the regulations
for electrostatic sensitive devices (ESD).
Furthermore, hazardous voltages can lead to lethal injuries when the
work is performed improperly.
If you suspect that the device has a defect, Siemens recommends to
send the entire device back to the manufacturer.
Cleaning
Switch off the device. Wiped the device with a clean, dry and soft cloth. Do not use
solvents.
Repacking a Device
•
If you store devices after incoming inspection, pack them in suitable storage pack-
aging.
•
If devices are to be transported, pack them in transport packing.
•
Put the accessories supplied and the test certificate in the packing with the device.
Storage
•
Only store devices on which you have carried out an incoming inspection, thus
ensuring that the warranty remains valid.
•
Store the device in a dry and clean location.
•
The relative air humidity must not lead to condensation or ice formation.
•
To avoid premature aging of the electrolytic capacitors, store the device within the
recommended temperature range of +10 °C to +35 °C (+50 °F to +95 °F).
•
If the device is stored for an extended period of time, Siemens recommend to
connect the device to the supply voltage for 1 or 2 days once a year to reform the
electrolytic capacitors in the device. This procedure should also be carried out be-
fore operating the device.
Transport
•
For reshipment, Siemens recommends using the original transport packaging of the
devices. If you use another packaging, make sure that the packaging meets the re-
quirements concerning the stress during transport according to the requirements of
standard ISO 2248. The storage packing of the individual devices is not adequate
for transport purposes.
•
The Lithium-batteries in our equipment are subject to Special Provision 188 of the
UN Recommendations on the Transport of Dangerous Goods Model Regulations
and Special Provision A45 of the IATA Dangerous Goods Regulation and the ICAO
Technical Instructions. This is only valid for the original battery or original spare bat-
teries.
Technical Data
SICAM SGU 7XV5676-0JJ00-7AA1 (Terminal Block H)
Supply Voltage – Direct Voltage
Rated input voltages
DC 24 V to 250 V
Admissible input voltage tolerance
±20 %
Permitted ripple of the input voltage
15 %
Maximum inrush current at ≤ 110 V
< 15 A
Maximum inrush current at 220 V to 300 V
≤ 22 A; after 250 µs: < 5 A
Supply Voltage – Alternating Voltage
Rated input voltages
AC 110 V to 230 V
System frequency
50 Hz/60 Hz
Admissible input voltage tolerance
±20 %
Permitted harmonics
2 kHz
Maximum inrush current at ≤ 115 V
< 15 A
Maximum inrush current at 230 V
≤ 22 A; after 250 µs: < 5 A
Fuses
Internal fuse, not replaceable
T1.6A/250V acc. to IEC 60127
Internal fuse, secondary, not replaceable
F2A/125V acc. to UL 248-14
SICAM SGU 7XV5676-xJx70-8AA2 (Terminal Block X)
Rated input voltages
DC 24 V SELV
Admissible input voltage tolerance
DC 19 V to 28.8 V
Maximum input current
1 A
Permitted ripple of the input voltage
±15 %
Power input
6.1 W: 7XV5676-xJJ70-8AA2
7.8 W: 7XV5676-xJL70-8AA2
Fuse
Internal fuse, not replaceable
2 A, slow-blow
Environmental Conditions (for indoor operation only)
Temperature Data
Operating temperature
-10 °C to +55 °C
(+14 °F to 131 °F)
Temperature during transport and storage
-25 °C to +70 °C
(-13 °F to +158 °F)
Air humidity data
Mean relative humidity per year
≤ 75 %
Maximum relative humidity
95 % 30 days a year
Condensation during operation
Not permitted
Condensation during transport and storage
Permitted
Other environmental data
Max. altitude above sea level
2000 m
Degree of pollution
2
GSM Antenna and Antenna Interface
Requirements for Antenna Type
Fixed antenna
For use in industrial environment acc.
to IEC 61010-1 Ed. 3 CAT III
Detached antenna
For remote installation in residential,
commercial and light industrial
environments
(IEC 61010-1 Ed. 3 CAT III).
Antenna Data
Antenna gain
GSM 1900
≤ 8.4 dBi
GSM 850
≤ 2.9 dBi
Connection values
Impedance
Approx. 50 Ohm
VSWR
1:2.5 or better
Antenna Interface at the Device
Type of antenna socket
SMA
Communication Mobile
GSM frequency bands
850 MHz
900 MHz
1800 MHz
1900 MHz
Maximum data rate
Up to 80 kbps uplink
Up to 40 kbps downlink
General data
GPRS multislot class 10,
Coding schema CS 1-4
