Siemens SICAM SGU 7XV5676 Manual Download

Page: 6 / 12

SICAM SGU Devices

7XV5676

Product Information

E50417-B1050-C554-A4, Edition 03.2015

Disclaimer of Liability

Although we have carefully checked the contents of this publication for conformity with
the hardware and software described, we cannot guarantee complete conformity since
errors cannot be excluded.

The information provided in this document is checked at regular intervals and any correc-
tions that might become necessary are included in the next releases. Any suggestions for
improvement are welcome.

Subject to change without prior notice.

Copyright

The reproduction, transmission or use of this document or its contents is not permitted
without express written authority. Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility model or design, are reserved.

Registered Trademarks

SICAM® is a registered trademark of SIEMENS AG. All other product and brand names
in this manual might be trademarks, the use of which by third persons for their purposes
might infringe the rights of their respective owners.

Open Source Software

The product contains, among other things, Open Source Software developed by third
parties. The Open Source Software used in the product and the license agreements
concerning this software can be found in the Readme_OSS.

These Open Source Software files are protected by copyright. Your compliance with
those license conditions will entitle you to use the Open Source Software as foreseen in
the relevant license. In the event of conflicts between Siemens license conditions and the
Open Source Software license conditions, the Open Source Software conditions shall
prevail with respect to the Open Source Software portions of the software.

The Open Source Software is licensed royalty-free. Insofar as the applicable Open
Source Software License Conditions provide for it you can order the source code of the
Open Source Software from your Siemens sales contact - against payment of the ship-
ping and handling charges - for a period of at least 3 years since purchase of the Product.
We are liable for the Product including the Open Source Software contained in it pursuant
to the license conditions applicable to the Product. Any liability for the Open Source
Software beyond the program flow intended for the Product is explicitly excluded. Fur-
thermore any liability for defects resulting from modifications to the Open Source Soft-
ware by you or third parties is excluded. We do not provide any technical support for the
Product if it has been modified.

Notes on Safety

This document contains notes that must be adhered to for your own personal safety and
to avoid damage to property. However, it does not constitute a complete description of all
safety measures required for installation, service, and maintenance of the equipment
(module, device) in question. Details are to be taken from the device manual and those
are mandatory.

WARNING

Danger of severe personal injury or substantial damage to property

Hazardous voltages may occur in devices and modules during operation
depending on the design and application.



Always observe the instructions given in “Qualified Electrical Engi-
neering Personnel” below.

Qualified Electrical Engineering Personnel

Only qualified electrical engineering personnel may commission and operate the equip-
ment (module, device) described in this document.

Qualified electrical engineering personnel in the sense of this document are people who
can demonstrate technical qualifications as electrical technicians. These persons may
commission, isolate, ground and label devices, systems and circuits according to the
standards of safety engineering.

Use as Prescribed

The equipment (device, module) may only be used for such applications as set out in the
catalogs and the technical description, and only in combination with third-party equipment
recommended and approved by Siemens.

If the device is not used in accordance with this product information, the scheduled
protection is impaired.

Correct and safe operation of the product requires adequate transportation, storage,
installation, and assembly, appropriate use, and maintenance as well as the attention of
the WARNINGs.

During the operation of electric equipment, it is unavoidable that certain parts of this
equipment will carry hazardous voltages. Severe injury or material damage can occur if
the appropriate

measures

are not taken.

The limiting values indicated in the product information and the manuals must not be
exceeded; this also refers to testing and commissioning.

Further Support

For any questions concerning your system, please contact your Siemens representative.
The Siemens Customer Support Center provides around-the-clock support.

•

Phone: +49 (1805) 24-7000

•

Fax: +49 (1805) 24-2471

•

Internet: http://www.siemens.com/sicam

•

e-mail: [email protected]

Statement of Conformity

Low-voltage Directive 2006/95/EC

EMC Council Directive 2004/108/EC

EMC test acc. to 301489-1-7

ETSI standard EN 301 511

This conformity has been established by means of tests conducted by
Siemens AG according to the Council Directive in agreement with the
generic standards EN 61000-6-2 and EN 61000-6-4 for the EMC
directives, and with the standard EN 61326-1 for the low-voltage
directive.

Further Standards

This product is UL-certified, based on the technical data:

- acc. to Standard UL 61010-1, third edition; UL File No.: E228586

Open-type Measuring Equipment

2UD1

For further information see UL database on the internet:

http://ul.com

. Chose

Online

Certifications Directory

and insert E228586 under

UL File Number