Servo Screen 390
E382 E394E 061 01 02 02
19
Siemens-Elema AB
3. Disassembly and assembly
3
Separating the display section
from the computer section
• Remove the six screws (1).
• Carefully separate the display section (2)
from the computer section (3) as much as
is needed to make the pulse generator
connector N12 on PC 1662 and connectors
N1, N2 and N3 at the rear of the display
accessible.
• Disconnect the connectors mentioned
above.
• The display section is now separated from
the computer section.
Assembling the display sec-
tion with the computer section
The procedure for assembling the display
section with the computer section is the
reverse of the separation procedure
described above.
Make sure that the rubber sealing strips are
mounted on the display section to obtain a
good seal between the sections.
SS-035X
2
3
1
Summary of Contents for Servo Screen 390
