Siemens SCALANCE X-200 Operating Instructions Manual Download Page 201

Page: 201 / 296

Configuration / diagnostics using remote mechanisms

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)

SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19

201

No Auth/No Priv

The members of the group do not need to

authenticate themselves when accessing the

IE Switch X-200 and communicate without

encryption.

Auth/No Priv

The members of the group need to authenticate

themselves for SNMP access to the IE Switch X-

200 but nevertheless communicate without

encryption.

Auth/Priv

The members of the group need to authenticate

themselves and communicate via an encrypted

SNMP connection.

Access

Here, you decide whether the members of the group have read and write permissions.

Summary of Contents for SCALANCE X-200









































































































































































































































































































Search results

Summary of Contents for SCALANCE X-200

Reviews:

Siemens SCALANCE X-200, Operating Instructions Manual, Page: 201 / 296

Search results

Summary of Contents for SCALANCE X-200

Reviews: