manualshive.com logo in svg

Siemens SCALANCE X-200, Operating Instructions Manual

Share
Download
Siemens SCALANCE X-200 Operating Instructions Manual Download Page 167

 

Configuration / diagnostics using remote mechanisms 

 

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI) 

SCALANCE X-200 
Operating Instructions, 12/2011, A5E00349864-19 

167

 

●

 

NOT PRESENT 

There is no C-PLUG inserted in the IE Switch X-200. 

●

 

EMPTY 

The inserted C-PLUG is empty. 

C-PLUG Device Group 

Indicates the SIMATIC NET product line that previously operated with the C-PLUG. 
C-PLUG Device Type 

Indicates the device type within the product line that previously operated with the C-PLUG. 
Configuration Revision 

Indicates the version of the configuration structure. This information relates to the 

configuration options supported by the IE Switch X-200. This does not relate to the actual 

hardware configuration. This information does not change if you add or remove modules or 

extenders. The information can, however, change if you update the firmware. 
File System 

Shows the type of C-PLUG file system. 
File System Size 

Shows the maximum storage capacity of the C-PLUG file system. 
File System Usage 

Shows the storage space being utilized in the C-PLUG file system. 
C-PLUG Info String 

Displays information on the device that used the C-PLUG previously, for example order 

number, type designation, version of hardware and software. 

 

NOTICE 

 

If an empty C-PLUG in is inserted in an IE Switch X-200, the next time the device starts up, 

the configuration stored internally on the basic device is transferred to the C-PLUG.  
If you operated an IE Switch X-200 with a C-PLUG inserted, the configuration stored 

internally on the basic device is no longer modified.  
During ongoing operation, changes to the configuration data are stored only on the C-

PLUG. 
If you remove the C-PLUG later, the configuration stored internally on the basic device 

becomes valid again. This restores the configuration status prior to inserting the C-PLUG. 

 

Modify C-PLUG, Modify button 

If you are logged on as administrator, you can make settings here. 

Summary of Contents for SCALANCE X-200









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands