Siemens SCALANCE X-100 Operating Instructions Manual Download Page 7 | Manualshive

Page: 7 / 78

background image

Introduction

1.2 On the product

SCALANCE X-100
Operating Instructions, 12/2016, A2B00060666-08

7

1.2

On the product

What is possible?

The devices of the SCALANCE X100 product line allow the cost-effective installation of

Industrial Ethernet bus and star structures with switching functionality.
With the following IE switches, there are also electrical/optical media transitions:

●

SCALANCE X104-2

●

SCALANCE X106-1

●

SCALANCE X112-2

IE switches with the suffix PoE also allow the supply of power to end devices over Ethernet

cables with Power-over-Ethernet complying with 802.3af.

Note
If devices are supplied over long 24 V power supply lines or networks, measures are

necessary to prevent interference by strong electromagnetic pulses on the supply lines.

These can result, for example, due to lightning or switching of large inductive loads.
One of the tests used to attest the immunity of these devices to electromagnetic interference

is the "surge immunity test" according to EN 61000-4-5. This test requires overvoltage

protection for the power supply lines. A suitable device is, for example, the Dehn Blitzductor

BVT AVD 24 V type no. 918 422 or a comparable protective element.
Manufacturer:

DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306 Neumarkt,

Germany

WARNING

When used in hazardous environments corresponding to Class I, Division 2 or Class I,

Zone 2, the device must be installed in a cabinet or a suitable enclosure.

WARNING

To comply with EU Directive 94/9 (ATEX95), this enclosure must meet the requirements of

at least IP54 in compliance with EN 60529.

WARNING

EXPLOSION HAZARD
DO NOT CONNECT OR DISCONNECT EQUIPMENT WHEN A FLAMMABLE OR

COMBUSTIBLE ATMOSPHERE IS PRESENT.

«
...
5
6
7
8
9
...
»

Summary of Contents for SCALANCE X-100















































































Reviews:

No comments

Related manuals for SCALANCE X-100

Brand: S&C Pages: 26

Brand: S&C Pages: 37

Brand: S&C Pages: 28

DGS-3224TGR - Switch

Brand: D-Link Pages: 160

Brand: D-Link Pages: 145

DGS-1510 Series

Brand: D-Link Pages: 64

DES-3528 - xStack Switch - Stackable

Brand: D-Link Pages: 367

Brand: OFFICINE OROBICHE Pages: 7

Brand: Kathrein Pages: 41

Brand: Rack World Pages: 4

Brand: AVLT-Power Pages: 12

Brand: KCC Pages: 6

Brand: Icy Box Pages: 6

Nexoos 370 Series

Brand: Soyntec Pages: 7

Brand: Accton Technology Pages: 523

Brand: Comm-Tec Pages: 48

Brand: Lightwave Pages: 53

JTECH-4K88-EX-RX

Brand: J-TECH Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands