Siemens SCALANCE X-100 Operating Instructions Manual Download Page 17

Page: 17 / 78

Description of the device

3.2 Product properties

SCALANCE X-100
Operating Instructions, 12/2016, A2B00060666-08

3.2.4

SCALANCE X108PoE

Possible connections

The SCALANCE X108 PoE has eight RJ-45 jacks for the connection of end devices or other

network segments. Ports 1 and 2 have the PoE function.

Figure 3-4

SCALANCE X108PoE

Power over Ethernet (PoE) function

The PoE function allows the power supply of connected Ethernet devices via the Ethernet

cable so that the end device does not need a separate power supply.
Per PoE port of the PSE (Power Sourcing Equipment), a maximum of 15.4 W power are

available according to the 802.3af standard.

Note
With a 100 m long cable connected, the end device then has a maximum of 12.95 W

available.

You will find more information on the PoE function in the section "TP ports (Page 20)".

Summary of Contents for SCALANCE X-100















































































Search results

Summary of Contents for SCALANCE X-100

Reviews:

Related manuals for SCALANCE X-100

Brands by name

Popular brands

Siemens SCALANCE X-100, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X-100

Reviews:

Related manuals for SCALANCE X-100

Brands by name

Popular brands