Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 302 / 570

Dynamic DNS Registration

18.3 Verifying the Configuration

SCALANCE W1750D UI

302

Configuration Manual, 02/2018, C79000-G8976-C451-02

18.3

Verifying the Configuration

To view the DDNS status on an AP:

(scalance)# show ddns DDNS Enabled :Enabled

DDNS Server :10.1.1.23

DDNS Key :dynamic-dns delete 10.17.132.7 test.ddns host-anand 10.17.132.85 key hmac-
sha1:siemensddns:16YuLPdH21rQ6PuK9udsVLtJw3Y=

DDNS Interval

900

To view the list of DDNS clients:

(scalance)# show ddns clients DDNS Client List

----------------

Host Name

Domain Name

IP Address

DHCP profile name

Success Count

Failure Count

---------

-----------

----------

-----------------

-------------

iap1-ddns-home

test.ddns

192.192.192.17

None

132-13-Auto-PC

test.ddns

192.168.99.18

DistL3

132-14-Auto-PC

test.ddns

192.168.99.4

DistL3

Last updated Last update status

------------ ------------------

7 seconds ago Success

Note
DHCP profile name is None for the Master AP update sent.

Note
The command displays the Key in the encrypted format.

Note
You can also configure dynamic DNS on an AP or clients using the privileged execution

mode in the CLI. For more information, refer to the show ddns clients command in the

Function Manual.

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands