Siemens SCALANCE M812 Page 69 Operating Instructions Manual Download

Page: 69 / 74

9.2.2

The Electromagnetic Compatibility Regulations 2016

Electromagnetic compatibility

The SIMATIC NET products described in these operating instructions meet the requirements of
"The Electromagnetic Compatibility Regulations 2016".

Applied standards:

• EN 50121-3-2

Railway applications - Electromagnetic compatibility - part 3-2: Railway Vehicles - Devices

• EN 50121-4

Railway applications - Electromagnetic compatibility - part 4: Emission and immunity of the
signaling and telecommunications apparatus

• EN 61000‑6‑2

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments

• EN 61000‑6‑4

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments

9.2.3

The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012

Restriction of the use of certain hazardous substances

The SIMATIC NET products described in these operating instructions meet the requirements of
"The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012".

Applied standard:

• EN IEC 63000

Technical documentation for the assessment of electrical and electronic products with
respect to restriction of hazardous substances

Approvals

9.2 UK Declaration of Conformity

SCALANCE M826
Operating Instructions, 10/2022, C79000-G8976-C362-07

Summary of Contents for SCALANCE M812











































































Search results

Summary of Contents for SCALANCE M812

Reviews:

Related manuals for SCALANCE M812

Brands by name

Popular brands

Siemens SCALANCE M812, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE M812

Reviews:

Related manuals for SCALANCE M812

Brands by name

Popular brands