63
S
Owner ID
You can store an owner ID in your
phone to be shown when you
switch on the phone. Select
»Define« to enter the necessary
information, which corresponds to
an address book entry. You can also
select an entry from your address
book or one of your phone books
to be stored as your owner ID.
Select »Show at power up« to
activate/deactivate the function.
When the function is activated
press »OWNER« during the power
up phase to see the contents of
your owner ID.
You can change an existing
Owner ID by selecting »Edit«.
The contents of the Owner ID
can be sent as a business card via
IrDA (see p. 39).
Facts & Tips
• If, by mistake, you select a language
which you do not understand, you can
always return to the original SIM card
language by pressing the following
keys:
0000
, in standby
mode.
• When you change the menu lan-
guage of your phone, it is advisable to
change the keypad language accord-
ingly.
• The owner ID is stored in the inter-
nal memory of the phone and will
thus not be shown in the display if
you use your SIM card in another
phone.
Setup menu
Phone setup
62
Setup menu
Enter the Setup menu
by pressing »MENU«
Select »Phone setup«
Language
Select »Language« to change the
menu language of your phone.
IrDA
Under »IrDA Nickname« you can
enter an ID name by which you
want other IrDA devices to identify
your mobile phone.
By selecting »Printer« and then
»Setup« you get the option to
define the protocol language of the
printer you want to use.
If you select »Test page«, a stan-
dard test page will automatically be
sent to the printer.
Backlight
To save your battery and thus
increase both conversation and
standby times you can choose to
have the backlight permanently
switched off.
Handsfree
(Car kit & headset)
This option is effective only if your
phone is connected to a handsfree
device. See specific user guides for
further information.
Greeting
Make a welcome greeting on your
phone according to your own wish-
es. Press »EDIT« and delete the old
greeting by holding down
»CLEAR«. Enter the new greeting
via the keypad, and confirm by
pressing »OK«. (This function may
not be available on all networks).
Signal diode
The LED on the top of the phone
provides information about the fol-
lowing:
• Green flash
In contact with a network
• Fast green flash
Incoming call
• Very fast green flashes
New information, e.g.
a missed call or a new message.
• Red flash
No contact with a network
• Fast red flash
Low battery
Select individually whether you
want these indicators to be active
or not.
Graphics
This submenu allows you to
choose between different symbols
for the battery and the signal
strength indicators.
This is also where you adjust the
contrast of the display.
First
User guide S40 US 19/09/01 15:44 Side 62
Summary of Contents for S40
Page 1: ...s S40 User Guide ...
