Siemens RUGGEDCOM WiN5100, User Manual, Page: 53 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
System Management 45
Configuration Button Description Option Pane Links
Access List
WiMAX Access to WiMAX scanner, authentication,
mobility, and radio settings.
Scanner Settings
Authentication
Mobility
Radio
Management Access to general CPE management
settings and functions.
System Functions
Log Management
Remote Management
SW Upgrade
SNMP
Alarms & Traps
NTP Server
Developer Mode
Ethernet Lock
Radius Login
Statistics Displays general CPE, RF, network, and
service flow statistics.
General
RF
Network
Service Flow
Section 6.2
System Management
This section describes how to:
• manage general system functions. See
Section 6.2.1, “Managing System Functions” .
• change the management interface password. See Section 6.2.2, “Changing the CPE Management Interface
Password” .
• manage CPE users and access levels. See Section 6.2.3, “Users and Access Levels” .
• configure the syslog parameters. See Section 6.2.6, “Log Management” .
• configure the remote management parameters. See Section 6.2.7, “Remote Management Parameters” .
• manage software versions and perform software upgrades. See Section 6.2.8, “Software Version
Management” .
• manage SNMP. See Section 6.2.9, “SNMP Administration” .
• manage Alarms & Traps. See Section 6.2.10, “Alarms & Traps” .
• manage the NTP Server. See Section 6.2.11, “NTP Server” .
• access Developer Mode. See Section 6.2.12, “Developer Mode” .
• lock the CPE. See Section 6.2.13, “Ethernet Lock” .
• log in from a remote location. See Section 6.2.14, “Radius Login” .