Siemens RUGGEDCOM WiN5100, User Manual, Page: 81 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
Radius Login 73
▪ A reboot due to a watchdog reboot.
▪ The Reboot button was pressed.
▪ The CPE rebooted from the base station.
NOTE
Management traffic to/from the CPE will always pass through.
Use the Ethernet Lock pane to lock the CPE.
Procedure: Setting the Ethernet Lock parameters
1. Click the Management button. The Management options appear in the options pane.
2. In the options pane, click the Ethernet Lock link. The Ethernet Lock pane appears.
Figure 63: Ethernet Lock pane
3. Review and set the Ethernet Lock settings in the following fields:
Table: Ethernet Lock table
Field Description
Ethernet Lock Displays the setting for the Ethernet Lock.
Values: Enable | Disable
Data Forwarding Displays the setting for Data Forwarding.
Values: Allowed | Blocked
4. Click the Apply button.
Section 6.2.14
Radius Login
Use the
Radius Login
pane to set radius login authentication settings for remote login.
Procedure: Setting the Radius Login parameters
1. Click the Management button. The Management options appear in the options pane.