Siemens RUGGEDCOM RX1501 Installation Manual Download | Manualshive

Page: 6 / 68

background image

Preface

This guide describes the RUGGEDCOM RX1501. It describes the major features of the

device, installation, commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible

for the installation, commissioning and maintenance of the device. It is also recom-

mended for use by network and system planners, system programmers, and line

technicians.

Related Documents

Other documents that may be of interest include:

Document Title

Link

RUGGEDCOM ROX CLI Configuration Manual

https://support.industry.siemens.com/cs/ww/en/-

view/109481699

RUGGEDCOM ROX Web Interface Configuration

Manual

https://support.industry.siemens.com/cs/ww/en/-

view/109481700

RUGGEDCOM Modules Catalog for RX1500 Series

https://support.industry.siemens.com/cs/ww/en/-

view/109747072

RUGGEDCOM SFP Transceivers Catalog

https://support.industry.siemens.com/cs/ww/en/-

view/109482309

Accessing Documentation

The latest user documentation for RUGGEDCOM RX1501 is available online at

https://support.industry.siemens.com

. To request or inquire about a user document,

contact Siemens Customer Support.

Registered Trademarks

RUGGEDCOM ™ and ROS™ are trademarks of Siemens AG.
Linux® is the registered trademark of Linus Torvalds in the United States and other

countries.
The registered trademark Linux® is used pursuant to a sublicense from LMI, the ex-

clusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.
Other designations in this manual might be trademarks whose use by third parties

for their own purposes would infringe the rights of the owner.

RUGGEDCOM RX1501

Installation Manual, 05/2020, C79000-G8976-1054-17

v

All manuals and user guides at all-guides.com

all-guides.com

«
...
4
5
6
7
8
...
»

Summary of Contents for RUGGEDCOM RX1501





































































Reviews:

No comments

Related manuals for RUGGEDCOM RX1501

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands