manualshive.com logo in svg

Siemens RUGGEDCOM RX1501, Installation Manual

The Siemens RUGGEDCOM RX1501 is a high-performance industrial Ethernet switch designed for demanding environments. Ensure a seamless installation with the comprehensive Installation Manual available for download, completely free of charge, from our website. Get all the necessary instructions and guidelines to set up this robust networking solution.

Share
Download
background image

Device Management
3.2 Configuring the Device

The management port is a 10/100Base-TX copper Ethernet port with an RJ-45 con-

nector. The following is the pin-out for the management port:

1

8

Figure 3.2

RJ-45 Management Port

 

Pin

Name

Description

1

RX+

Receive Data+

2

RX-

Receive Data-

3

TX+

Transmit Data+

4

Reserved (Do Not Connect)

5

Reserved (Do Not Connect)

6

TX-

Transmit Data-

7

Reserved (Do Not Connect)

8

Reserved (Do Not Connect)

Communication Ports

Connect any of the available Ethernet ports on the device to a management switch

and access the RUGGEDCOM RX1501 console and Web interfaces via the device's

IP address. The factory default IP address for the RUGGEDCOM RX1501 is 

https://-

192.168.0.2

.

For more information about available ports, refer to 

"

Modules

 (Page 25)"

.

Note

Single-mode fiber ports only support Ultra Physical Contact (UPC) cable connectors.

3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured. All

configuration management is done via the RUGGEDCOM RX1501 interface. For more

information about configuring the device, refer to the 

RUGGEDCOM ROX Configura-

tion Manual

 associated with the installed software release.

3.3

Accessing the CompactFlash Card

The RUGGEDCOM RX1501 features a removable CompactFlash (CF) card that stores

configuration files, firmware (active and backup versions), file-based feature keys

and other system files.

NOTICE

Configuration hazard – risk of data corruption/loss

Do not remove or insert the CF card when the device is powered on.

The CF card should only be removed in the following scenarios:
• The chassis is defective (with the exception of power and media modules)

22

RUGGEDCOM RX1501

Installation Manual, 05/2020, C79000-G8976-1054-17

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for RUGGEDCOM RX1501





































































Reviews:

No comments

Related manuals for RUGGEDCOM RX1501

Brands by name

Popular brands

Load more brands