Siemens RUGGEDCOM RSG908C Installation Manual Download Page 6

Page: 6 / 48

Preface

This guide describes the RUGGEDCOM RSG908C. It describes the major features of

the device, installation, commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible

for the installation, commissioning and maintenance of the device. It is also

recommended for use by network and system planners, system programmers, and

line technicians.

Related Documents

Other documents that may be of interest include:

Document Title

Link

RUGGEDCOM ROS Configuration Manual

https://support.industry.siemens.com/cs/ww/en/

view/109757205

RUGGEDCOM SFP Transceivers Catalog

https://support.industry.siemens.com/cs/ww/en/

view/109482309

Time Synchronization Capabilities of RUGGEDCOM

Devices

https://support.industry.siemens.com/cs/ww/en/

view/109780448

SIMATIC NET Glossary

The SIMATIC NET Glossary describes special terms that may be used in this

document.
The glossary is available online via Siemens Industry Online Support (SIOS) at:

https://support.industry.siemens.com/cs/ww/en/view/50305045

Accessing Documentation

The latest user documentation for RUGGEDCOM RSG908C is available online at

https://support.industry.siemens.com

. To request or inquire about a user document,

contact Siemens Customer Support.

Registered Trademarks

RUGGEDCOM®, ROS®, RCDP®, and RUGGEDCOM Discovery Protocol® are registered

trademarks of Siemens Canada Ltd.

RUGGEDCOM RSG908C

Installation Manual, 04/2022, C79000-G8976-1404-11

Summary of Contents for RUGGEDCOM RSG908C

















































Search results

Summary of Contents for RUGGEDCOM RSG908C

Reviews:

Related manuals for RUGGEDCOM RSG908C

Brands by name

Popular brands

Siemens RUGGEDCOM RSG908C, Installation Manual

Search results

Summary of Contents for RUGGEDCOM RSG908C

Reviews:

Related manuals for RUGGEDCOM RSG908C

Brands by name

Popular brands