Siemens PowerLink 100 Product Information Download Page 53

Page: 53 / 54

[scdeport-260313-01.tif, 1, en_US]

Figure 7-2

SWT 3000 PU4 USB to UART Bridge Controller

NOTE
The COM-port of the USB to UART Bridge controller is only displayed in the Windows Device manager or

the Options > Connection dialog of PowerSys, if PC and SWT 3000 are connected by the USB cable

supplied with the device. The power supply of the SWT 3000 can be switched ON or OFF.

With the PowerSys software, the SWTStraps program is also delivered. The program is useful to carry out the

jumper settings for the SWT 3000 as well as iSWT modules. You can find the SWTStraps program on the

PowerSys DVD.

Service Program PowerSys

7.3 Installation of the Service Program PowerSys

Smart Communications, PowerLink 100 and PowerLink 50, Product Information

E50405-U53-X-B3-7670, Edition 11.2014

Summary of Contents for PowerLink 100























































Search results

Summary of Contents for PowerLink 100

Reviews:

Related manuals for PowerLink 100

Brands by name

Popular brands

Siemens PowerLink 100, Product Information

Search results

Summary of Contents for PowerLink 100

Reviews:

Related manuals for PowerLink 100

Brands by name

Popular brands