Siemens OPTIPOINT 500, Service Manual

Page: 65 / 120

P31003-E8400-A100-3-7620
Service Manual
7-1
IP Adapter
7 IP Adapter
An IP adapter provides voice communication via LAN connections.
The optiPoint IP adapter is an external adapter for optiset E terminals, which can be configured
in the following system environment:
●
Hicom 150 E Office/Hicom Xpress
@
LAN
●
Hicom 150 H
●
HiPath Allserve 150 with HiPath HG1500
●
HiPath 3000
●
Hicom 300 E and Hicom 300 H
●
HiPath 4000
IP Adapter Administration
The optiPoint IP adapter can be administered both via the telephone connected to the U
P0/E
port (basic settings only) and a LAN-based PC (web browser = HTTP client - all settings, e.g.
Upload new firmware, Save configuration files, etc.).
Administration via telephone is essential for initial commissioning if DHCP support ( D ynamic
H ost C onfiguration P rotocol) is not available. DHCP support is activated by default in the case
of optiPoint IPadapter. If DHCP is supported, the optiPoint IPadapter is automatically recog-
nized in the LAN and can immediately be administered via the web browser.
For information on the administration of the LAN environment at Hicom Xpress
@
LAN, please
refer to the administration manual for HiPath HG 1500/Hicom Xpress
@
LAN (reference no.:
A31003-K5020-B811-*-7619).
>
Note:
●
A voice client setting must be configured for Assistant I.
●
The extensions must be set manually as TFA clients for Assistant 300E.