Siemens OpenStage 40 G SIP User Manual Download

Page: 91 / 220

Enhanced phone functions

Step by step

Ignoring second call

Prerequisite:

You are conducting a call and call waiting

is allowed (

page 92).

In the pop-up menu:

Select and confirm the option shown.
The caller still hears the on-hook signal. You can subse-
quently Accept, Reject or Deflect the second call.

While the ignored second call continues to wait, from
the active call you can:
•

make a consultation call

•

initiate a conference

•

toggle between the consultation call and your call
party

•

transfer a call

A third call would be rejected with the busy signal

If you have disconnected the first call, the ignored sec-
ond call rings like a normal call.

Rejecting a second call

Prerequisite:

You are conducting a call and call waiting

is allowed (

page 92).

In the pop-up menu:

Select and confirm the option shown.

The second call is rejected. The caller hears the busy
signal. The caller’s phone number is added to the
missed calls list.

Deflecting a second call

Prerequisite:

You are conducting a call and call waiting

is allowed (

page 92).

In the pop-up menu:

Select and confirm the option shown.

Enter and confirm the phone number.

The second call is deflected to the destination speci-
fied. You are reconnected with the first party.

Ignore

Reject

Deflect

Summary of Contents for OpenStage 40 G SIP





























































































































































































































Search results

Summary of Contents for OpenStage 40 G SIP

Reviews:

Related manuals for OpenStage 40 G SIP

Brands by name

Popular brands

Siemens OpenStage 40 G SIP, User Manual

Search results

Summary of Contents for OpenStage 40 G SIP

Reviews:

Related manuals for OpenStage 40 G SIP

Brands by name

Popular brands