© Siemens VDO Automotive AG
33
Error code - Overview
➥
To be continued on the next page
Displayed message
Code
Meaning / measure
(Time is flashing)
9 0 5 3
or
=
• The MTCO 1324 has automatically changed over
to the beginning or the end of the daylight saving
time,
• or the time has been adjusted with the chart
inserted.
Note: update the chart carrier settings,
➥
see page 34
.
9 0 6 4
=
Error during chart carrier settings update
Update the chart carrier settings once again,
➥
see page 34
.
(Colon is not flashing)
9 0 6 4
=
Error in the driving mechanism of the chart carrier
Check whether the charts have been correctly
inserted.
A 0 5 0
=
Trip without driver 1 chart
(Error code cannot be found in the error memory.)
Insert driver 1 chart.
9 0 5 1
9 0 5 2
=
=
Driver 1 chart is missing
Driver 2 chart is missing
(This message will appear when switching from
to
, for example, while the chart is missing.)
Insert chart(s).
9 0 0 A
9 0 0 B
=
Error during CAN transmission
A 0 0 C
=
Internal error
9 0 0 F
=
Keypad error, key pressed too long or blocked
9 0 1 0
=
LCD error (display)
9 0 6 0
=
Error at the drawer
Start the ejection procedure and close the dra-
wer again afterwards.