Siemens MindConnect IoT2040 Getting Started Download Page 31

Page: 31 / 96

Getting Connected to MindSphere
Getting Started, 05/2018

Connecting MindConnect Elements

This chapter shows you how to connect MindConnect Elements to the power supply and to

the Internet (for MindSphere).

5.1

Commissioning MindConnect Element

Objective

The MindConnect Elements should be connected to the power supply and commissioned.

Requirements

●

The protective conductor is connected (valid only for MindConnect Nano). Refer to the

chapter Connecting the protective earth (Page 20).

●

A two-core cable with a cable cross-section of 0.75 mm² to 2.5 mm².

●

A slotted screwdriver with a 3 mm blade.

NOTICE
Power supply requirements
MindConnect Nano should only be connected to a 24 V DC to power supply which satisfies

the requirements of safety extra low voltage (SELV) according to IEC/EN/DIN EN/UL

60950-1.
MindConnect IoT2040 should only be connected to a 9...36 V DC power supply which

meets the requirements of safe extra low voltage (SELV) according to IEC/EN/DIN EN/UL

60950-1.
The power supply must meet the NEC class 2 or LPS requirement in accordance with

IEC/EN/DIN EN/UL 60950-1.

Note
The MindConnect Nano/IoT2040 package does not include power supply. The appropriate

power supply product from Siemens with the name SITOP can be used.

Summary of Contents for MindConnect IoT2040

































































































Search results

Summary of Contents for MindConnect IoT2040

Reviews:

Brands by name

Popular brands

Siemens MindConnect IoT2040, Getting Started

Search results

Summary of Contents for MindConnect IoT2040

Reviews:

Brands by name

Popular brands