manualshive.com logo in svg

Siemens MASTERDRIVES MC 1FK7, Configuration Manual, Page: 86 / 166

Share
Download
Siemens MASTERDRIVES MC 1FK7 Configuration Manual Download Page 86

Motor Components (Options)

 

Holding brake

1FK7 Synchronous Motors

4-10

Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1

4.3

Holding brake

4.3.1

Features 

•

The integrated or mounted holding brake is used to clamp the motor shaft when the motor 
is at a standstill. The holding brake is 

not

 a working brake that is used to brake a motor 

that is still rotating.

•

Motors with or without holding brake cannot be subsequently retrofitted! 
Motors with holding brake are longer by the mounted space required (refer to the dimen-
sion drawing). 

•

Restricted Emergency Stop operation is permissible. 
Up to 2000 braking operations can be executed with 300% rotor moment of inertia as 
external moment of inertia from a speed of 3000 RPM without the brake being subject to 
an inadmissible amount of wear. The specific highest switching work for each emergency 
braking operation may not be exceeded.

•

The rated voltage of the holding brake is 24 V DC.

Caution

The rated voltage is 24 V DC +/- 10%. Voltages outside this tolerance bandwidth can result 
in faults.

Inadmissible wear means that the braking function can no longer be guaranteed! 
It is not permissible to exceed the above specified Emergency Stop conditions or to 
repeatedly briefly accelerate the motor against a holding brake that is still closed. This 
means that the switching times of the brakes and relays must be taken into account in the 
drive control and enable functions.

Summary of Contents for MASTERDRIVES MC 1FK7







































































































































































Reviews:

No comments