manualshive.com logo in svg

Siemens MASTERDRIVES MC 1FK7, Configuration Manual, Page: 6 / 166

Share
Download
Siemens MASTERDRIVES MC 1FK7 Configuration Manual Download Page 6

Foreword

1FK7 Synchronous Motors

iv

Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1

Target group of the Configuration Manual

The Configuration Manual addresses planners and design engineers. It supports you 
when selecting motors, calculating the drive components, selecting the required accesso-
ries as well as when selecting line and motor-side power options.

Table -1:

Technical Support_normal

Technical support

If you have any questions, please contact the following Hotline:

Please send any questions about the documentation (e.g. suggestions for improvement, 
corrections) to the following fax number or email address:

Information on the products

Up-to-date information about our products can be found on the Internet at the following 
address:

Tel.:

+49 (0) 180 5050–222

Fax:

+49 (0) 180 5050–223

Internet:

http://www.siemens.com/automation/support-request

Fax:

+49 (0) 9131 98–63315

Fax form:

Refer to the correction sheet at the end of the document

E-mail:

[email protected]

http://www.siemens.com/motioncontrol

Summary of Contents for MASTERDRIVES MC 1FK7







































































































































































Reviews:

No comments