manualshive.com logo in svg

Siemens MAMMOMAT Novation SP, Installation Instructions Manual, Page: 25 / 36

Share
Download
Siemens MAMMOMAT Novation SP Installation Instructions Manual Download Page 25

Siemens AG

SPB7-250.812.03.02.02

MAMMOMAT Novation

08.04

CS SD 24

Installing the system components

25

Page 25 of 36

Medical Solutions

Free-standing radiation shield (option)

0

Fig. 15: Free-standign radiation shield

The free-standing radiation shield must be bolted to the floor, see separate instructions 
enclosed with the radiation shield (SPB7-230.031.07.xx.xx).

Control console

0

The control console can be mounted

•

to the radiation shield 

•

to the wall - horizontally or vertically as shown in 

(Fig. 16 / p. 26)(Fig. 17 / p. 26)

 below 

•

on a table

in the examination room or in an adjacent room with radiation-proof windows. It is impor-
tant that the control console is placed so that the operator has a good view of the patient 
from the control console.

Ensure that the control console is attached to the wall with adequate safety margins. Dow-
els and screws are not supplied. Please obtain these locally and ensure that they are suit-
able for the material used in the wall. The control console has a weight of 4 kg.

Summary of Contents for MAMMOMAT Novation SP





































Reviews:

No comments