manualshive.com logo in svg

Siemens MAMMOMAT Novation SP, Installation Instructions Manual, Page: 11 / 36

Share
Download
Siemens MAMMOMAT Novation SP Installation Instructions Manual Download Page 11

Siemens AG

SPB7-250.812.03.02.02

MAMMOMAT Novation

08.04

CS SD 24

Unpacking the system components

11

Page 11 of 36

Medical Solutions

4-

 

3Unpacking the system components

Scope of delivery

0

The 

MAMMOMAT Novation

DR

 is normally packed in two crates and one cardboard box 

(the number of packages depends on the customer's choice):

The MAMMOMAT Novation

DR

 has an area loading of 800 kg/m2; according to DIN 

1055T3, 1000 kg/m2 are permissible.

Crate (length: 210 cm, width: 80 cm, height: 150 cm), 360 kg plus 60 kg (pallet)

The crate contains the MAMMOMAT NovationDR stand.

Crate (lenght: 210 cm, width: 80 cm, height: 120 cm)

The crate contains:

•

Accessories, e.g. cover panels, WorkStation, compression plates, documentation, in-
stallation material

•

Radiation shield

Cardboard boxes (length: 90 cm, width: 80 cm, height: 60 cm), approximately 60 kg

This cardboard box contains the detector.

NOTE

The detector package is temperature sensitive, from 10

°

 to 40

°

 Cel-

sius.

NOTE

The detector package has to be disposed locally, after the installa-
tion.

Summary of Contents for MAMMOMAT Novation SP





































Reviews:

No comments