Siemens LOGO! 8, Manual

Page: 8 / 38

2 Solution
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2, 09/2018
8
©
S
ie
m
e
n
s
A
G
2018
A
ll
r
ig
h
ts
r
e
s
e
rv
e
d
Software components
Table 2-2
Component Qty Article number Note
LOGO! Soft Comfort V8 1 6ED1058-0BA08-0YA1 Update V8.2
(
Download )
LOGO! W eb Editor 1 ( Download )
Example files and projects
The following list includes all files and projects that are used in this example.
Table 2-3
Component Note
64143308_LOGO!8_Set9_Master_Slave_CODE_v22.ZIP This zip-file contains
•
The LOGO! Soft Comfort V8 project
for the master LOGO!
•
A LOGO! Web project for the user
defined webserver
64143308_LOGO!8_Set9_Master_Slave_DOC_v22_en.pdf This document.
2.3 House functions
2.3.1 Blinds
Inputs and outputs
Table 2-4
No. Hardware LOGO! module Program inputs/outputs
1. Blinds button left up (make
contact) Master I1 I1
2. Blinds button left down
(make contact) Master I2 I2
3. Blinds button right up (make
contact) Master I3 I3
4. Blinds button right down
(make contact) Master I4 I4
5. Blinds motor left up Master Q1 Q1
6. Blinds motor left down Master Q2 Q2
7. Blinds motor right up Master Q3 Q3
8. Blinds motor right down Master Q4 Q4
Function description
In the LOGO! program, the blinds are controlled with wiping relays.
The runtime for the blinds until the top or bottom end stop was defined as
40 seconds. This value was also calculated as the pulse duration of the wiping
relays. The blind drives have normally automatic end position detection for
stopping the drives.