Steam
en
19
6.
Fill the water tank with water up to the "max"
mark.
7.
Put the cover back into the opening on the water
tank.
8.
Slide the full water tank back into the recess .
When doing so, make sure that the water tank clicks
into place in the retainers .
9.
Slowly slide the control panel downwards and then
push it away from you until it is closed completely.
11.2 Setting options with steam
There are various ways in which you can prepare your
food with steam.
Added steam
When you cook with added steam, the appliance intro-
duces steam into the cooking compartment at various
intervals. This gives your food a crispy crust and a
shiny surface. Meat stays juicy and tender, and only un-
dergoes a minimum reduction in volume.
You can combine added steam with the following
functions:
¡
– 4D hot air
– Top/bottom heating
– Circulated air grilling
– Keeping warm
¡
¡
Steam jet
You can use the steam jet function to specifically add
intensive steam at various intervals. This makes bread
and bread rolls in particular wonderfully crispy and
gives them a golden colour.
The appliance adds clouds of steam to the cooking
compartment for approx. 3 to 5 minutes. Depending on
the operation, you can activate the steam jet several
times.
You can add the steam jet for the following functions:
¡
– 4D hot air
– Top/bottom heating
– Circulated air grilling
¡
Note:
Only use the steam jet when cooking compart-
ment temperatures are above 120 °C.
11.3 Setting added steam
Requirements
¡
Observe the information about the respective operat-
ing mode.
→
"Setting options with steam", Page 19
¡
The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. Operation is stopped.
→
"Filling the water tank", Page 18
1.
Press the operating mode that you require.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Press "Added Steam" .
4.
Press the required steam level.
Steam level
Added steam
1
Low
2
Medium
3
High
5.
Use "Start" to start the operation.
a
The appliance starts heating.
a
The adjustment values and how long the appliance
has already been in operation are shown on the dis-
play.
6.
When the food is ready, use to switch the appli-
ance off.
7.
Empty the water tank and dry the cooking compart-
ment.
→
"After using steam operation", Page 20
Changing added steam
You can change or deactivate the added steam func-
tion at any time.
1.
Press the steam level.
2.
Change or deactivate added steam.
3.
Press "Apply".
11.4 Setting the steam jet function
Requirements
¡
Observe the information about the respective operat-
ing mode.
→
"Setting options with steam", Page 19
¡
The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. Operation is stopped.
→
"Filling the water tank", Page 18
1.
Press the operating mode that you require.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Start the operation.
4.
Press "Steam jet" at the desired time.
a
The appliance starts to heat the water.
