en
Steam
24
Starting
1.
Fill the water tank.
2.
Set the type of heating using the rotary selector.
3.
Touch the "Temperature" field and set the
temperature using the rotary selector.
4.
Touch the "Added steam" field and set the steam
intensity using the rotary selector.
5.
Press the
u
button to start.
The appliance heats up. Once the appliance has
heated up, an audible signal sounds and the
operation begins.
Note:
If the water tank runs dry during a steam
operation, a message appears on the display
prompting you to fill up the water tank. The operation
continues without adding steam.
Cancelling steam addition
To switch off steam assistance early, touch the "Added
steam" field. Use the rotary selector to set to "Off".
Note:
The operation continues without adding steam.
Cancelling appliance operation
Touch the
u
button to cancel the operation.
Finishing
Touch the
k
button to switch off the appliance.
Reheating
With the "Reheating
W
" type of heating, you can gently
reheat food that has already been cooked or crisp up
day-old baked goods. Steam is switched on
automatically.
Note:
If the water tank runs dry during the operation
with the Reheating setting, the operation is interrupted.
Fill the water tank.
Starting
1.
Fill the water tank.
2.
Touch the
j
button.
3.
Touch the "Steaming" field.
4.
Use the rotary selector to set to "Reheating
W
".
5.
Touch the "Temperature" field and set the
temperature using the rotary selector.
6.
Touch the "Duration" field and set the duration using
the rotary selector.
7.
Press the
u
button to start.
The appliance heats up. Once the appliance has
heated up, an audible signal sounds and the
operation begins.
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the
0
button.
Cancelling
Touch the
u
button to cancel the operation.
Finishing
Touch the
k
button to switch off the appliance.
Prove dough
Dough will prove considerably more quickly using the
"Dough proving
R
" type of heating than at room
temperature and does not dry out.
Use the information in the tables to select the
"Tested for you in our cooking
Note:
If the water tank runs dry during the operation
with the Dough proving setting, the operation is
interrupted. Fill the water tank.
Starting
1.
Fill the water tank.
Note:
Only switch on Dough proving once the
cooking compartment has completely cooled down
(to room temperature).
2.
Touch the
j
button.
3.
Touch the "Steaming" field.
4.
Use the rotary selector to set to "Dough proving
R
".
5.
Touch the "Temperature" field and set the
temperature using the rotary selector.
6.
Touch the "Duration" field and set the duration using
the rotary selector.
7.
Press the
u
button to start.
The appliance heats up. Once the appliance has
heated up, an audible signal sounds and the
operation begins.
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the
0
button.
Cancelling
Touch the
u
button to cancel the operation.
Finishing
Touch the
k
button to switch off the appliance.
Filling the water tank
The water tank is located behind the control panel.
Before starting an operation with steam, open the
control panel and fill the water tank with water.
Make sure that you have set the water hardness range
:
Warning – Risk of injury and risk of fire!
Only fill the water tank with water or with the descaling
solution that is recommended by us. Do not pour any
flammable liquids (e.g. alcoholic drinks) into the water
tank. Due to hot surfaces, vapours from flammable
liquids may catch fire in the cooking compartment
(explosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
:
Warning – Risk of burns!
The water tank may heat up while the appliance is in
operation. Wait until the water tank has cooled down
after the previous appliance operation. Remove the
water tank from the water tank recess.
Summary of Contents for HN678G4.6W
Page 2: ......