Configuration
20
Editing a Configuration
Call up the configuration of the selected optiPoint type. Before you can en-
ter a value in a field in the
Setting
column, you must mark the matching
option in the
Parameter
column. Values entered in the
Setting
column are
not sent to the devices if you did not mark the matching option in the
Pa-
rameter
column.
Switch to a different tab by clicking the required tab header. For information
on the tabs and parameters that you can process for a device type, see the
section on
optiPoint types
Æ
page 27 and the section on
Tabs
Æ
page 36.
Example:
Confirm the dialog with
OK
after entering the necessary parameter values
for this device type in all tabs (
Æ
page 27).
Alternatively, you can use
•
Reset all
to delete all values in the
Setting
column and at the same
time remove all markings in the
Parameter
column.
(
Reset all
applies to all tabs).
•
Or quit the dialog with
Cancel
without applying the settings.
