Siemens HiPath 1120, Programming Manual

Page: 18 / 180

Step by Step
Main Configurations
18
Enter the number for the group of external lines (e.g., 0,
890, etc).
Enter the next extension number
or
Press this key.
Initial state for Programming Mode.
Analog Line Attendants
If you want calls received over external analog lines to
ring at specified extensions at certain times of the day,
all you need to do is configure them as analog line
Attendants.
Any extension can also be configured as a Second Atten-
dant. In this case an extension only receives a call when
the external line answering extension does not answer
the call within a specified time (
Æ page 42. When this
occurs, extensions configured as Second Attendants for
external lines receive the call.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter a number for an external analog line (e.g., 801).
... Select the period of the day for answering calls:
#
For example,
External lines 801 and 802 are programmed as
part of the 890 group of lines.
When using code 002, Extension 11/101 is
assigned to Group 890. This means that when
the "0" access code is entered at this extension
a search for a free line is performed in Group 890.
If no line is available in Group 890, the system
searches other groups.
With code 002, Extension 11/101 is assigned to
Group 0. This means that when the "0" access
code is entered at this extension a search for a
free line will be performed in Group 0.
If line is available in Group 0, the system search-
es other groups.
4 2
1 4