11
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Requirement: Your appliance is switched off.
1.
Press and hold the
0
button for several seconds.
The first basic setting appears in the display.
2.
Use the
@
or
A
button to change the basic setting.
3.
Confirm by pressing the
0
button.
The next basic setting appears in the display. You can go
through all of the basic settings using the
0
button and
make changes using the
@
or
A
button.
4.
When finished, press and hold the
0
button for several
seconds.
All settings are applied.
You can change the settings at any time.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of short circuit!
Never use high-pressure cleaners or steam cleaners to clean
the oven.
:
Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
Notes
■
Slight differences in colour on the front of the appliance are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
■
Unpleasant odours, e.g. after fish has been prepared, can be
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use:
■
any caustic or abrasive cleaning agents,
■
metal or glass scrapers to clean the glass in the appliance
door,
■
metal or glass scrapers to clean the door seal,
■
hard scouring pads and sponges,
■
cleaning agents with high concentrations of alcohol.
Rinse out new sponge cloths thoroughly before use.
For easier cleaning, you can switch on the oven light. Open the
appliance door to do so.
Basic setting
Options
Explanation
™‚
Clock display
‚
= on
Clock display
ƒ
= off
Displays the clock
™ƒ
Signal duration:
ƒ
= medium = 2 minutes
Signal duration:
‚
= short = 10 seconds
„
= long = 5 minutes
Signal after the cooking time has elapsed
™„
Button tone:
‚
= on
Button tone:
ƒ
= off
Confirmation tone when a button is pressed
™…
Waiting time:
ƒ
= medium = 5 seconds
Waiting time:
‚
= short = 2 seconds
„
= long = 10 seconds
Waiting time between two separate steps, after
setting
™†
Signal volume:
ƒ
= medium
Signal volume:
‚
= low
„
= high
Volume of the signal
Area
Cleaning agents
Appliance front
Hot soapy water:
Clean using a dish cloth and then dry
with a soft cloth. Do not use glass clean-
ers or metal or glass scrapers for clean-
ing.
