Siemens GIGASET SX762 WLAN DSL Manual Download Page 67

Page: 67 / 149

Configuring Advanced Settings

Gigaset SX762 WLAN dsl / en / A31008-M707-L101-1-7619 / configure_router.fm / 15.05.2007

hablone 200

5_05_

We recommend that you use an address from a block that is reserved for private use.
This address block is 192.168.1.1 to 192.168.255.254.

Adjust the

Subnet mask

if necessary.

The

Subnet mask

specifies how many address parts of the IP address must be iden-

tical for all network components (including routers).

Configuring the DHCP server

The Gigaset SX762 WLAN dsl has a

DHCP server

for which the factory setting is active.

Consequently, the IP addresses of the PCs are automatically assigned by the Gigaset
SX762 WLAN dsl.

To activate the DHCP server, select

If the DHCP server is active, you can define a

Lease time

. The least time indicates

how long the client may use the allocated IP configuration.

Define the range of IP addresses the Gigaset SX762 WLAN dsl should use to auto-
matically assign IP addresses to the PCs. Define the

First issued IP address

and the

Last issued IP address

If you want to define a different

Default gateway

in your local area network instead

of the Gigaset SX762 WLAN dsl, enter the IP address of this default gateways in the
relevant boxes.

Notes:

You can only change the last part of the subnet mask at the moment (even if fur-
ther parts are displayed as editable).

New settings can only be made after the Gigaset SX762 WLAN dsl has been
rebooted. If necessary, reconfigure the IP address on your PC (including one that
is statically assigned) so that it matches the new configuration.

Note:

If the DHCP server for the Gigaset SX762 WLAN dsl is activated, you can configure
the network setting on the PC so that the option

Obtain an IP address automat-

ically

is set up. For further information, refer to the section entitled "Configuring

the local area network" on the CD-ROM.

If you deactivate the DHCP server, you will have to assign a static IP address for the
PCs that use the network settings.

Note:

If you select

Never expires

, the IP addresses are never changed. Activate this

option if you want to make NAT or firewall settings using the IP addresses of the
PCs; otherwise you have to assign static IP addresses to these PCs.

Summary of Contents for GIGASET SX762 WLAN DSL






















































































































































Search results

Summary of Contents for GIGASET SX762 WLAN DSL

Reviews:

Related manuals for GIGASET SX762 WLAN DSL

Brands by name

Popular brands

Siemens GIGASET SX762 WLAN DSL, Manual

Search results

Summary of Contents for GIGASET SX762 WLAN DSL

Reviews:

Related manuals for GIGASET SX762 WLAN DSL

Brands by name

Popular brands