51
Configuring Advanced Settings
Gigaset SX762 WLAN dsl / en / A31008-M707-L101-1-7619 / configure_router.fm / 15.05.2007
Sc
hablone 200
5_05_
02
– In the
Subnet mask
field enter the given
ì
Click
Test Settings
to check the settings.
An attempt is made to set up an Internet connection. The result is shown in a sepa-
rate window.
ì
Click the
Close
button, which is shown if the test was successful.
ì
Click
OK
to apply the settings.
Note:
If you have selected
Non NAT service
during the Internet connection configuration
no IP address translation takes place as described in section "Setting up the NAT func-
tion" on page 57. In this case a PC which you want to provide Internet services (e.g.
Web or FTP service) is accessed from the Internet via its own IP address. You may have
to change the network settings of the PC so that the IP address is in line with the
router’s IP address and subnet mask. For detailed information how to do this, refer to
the document entitled "Configuring the local area network" on the CD-ROM. Addition-
ally, you should install a firewall software on the PCs, e.g. by using the Windows oper-
ating system resources.