Siemens Gigaset S450 IP User Manual Download Page 74

Page: 74 / 143

Using several handsets

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / T-NetBox_SAG-registration.fm / 28.3.07

ion 4,

.09.

2005

Registering other handsets on the

Gigaset SP450 IP

You can register other Gigaset handsets

and handsets for other devices with GAP

functionality as follows.

On the handset

Start to register the handset as

described in its user guide.

On the base station

Press and hold the registration/paging

key on the base station (page 1)

(min. 1 sec.).

De-registering handsets

You can de-register any registered handset

from any registered Gigaset S45 handset.

Open list of internal users.

The handset you are currently

using is indicated by

Select the handset to be de-

registered.

§Options§

Press the display key.

De-reg. H/Set No.

Select and press

§OK§

Enter the base station system

PIN (default setting: 0000).

§Yes§

Press the display key to con-

firm the prompt.

Press and

hold

(idle status).

The handset is de-registered immediately,

even if it is not in idle status.

Locating a handset ("paging")

You can locate your handset using the

base station.

Press the registration/paging key on the

base station (page 1)

briefly

All handsets will ring at the same time

("paging"), even if ringer tones are

switched off.

Ending paging

Press the registration/paging key on the

base station (page 1)

briefly

Press talk key

on a handset.

Changing the base station

If your handset is registered to more than

one base station, you can set it to a partic-

ular base station or to the base station

that has the best reception (

Best Base

Settings

Handset

Select Base

Select one of the registered

base stations or

Best Base

and

press

§OK§

Please note:

You can also make changes on the base station

with a Gigaset C45 handset.

Summary of Contents for Gigaset S450 IP
















































































































































Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands

Siemens Gigaset S450 IP, User Manual

Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands