Siemens Gigaset S450 IP User Manual Download Page 43

Page: 43 / 143

SMS (text messages)

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / sms_BRD_neutral.fm / 28.3.07

ion 4,

.09.

2005

Writing/editing an SMS

You are reading an SMS in the draft

message list.

§Options§

Open menu.

You have the following options:

New SMS

Write a new SMS and then send

(page 40) or save it.

Edit

Edit the text of the saved SMS and then

send (page 40).

Character Set

Text is shown in the selected character

set.

Deleting draft message list

Open the draft message list and then:

§Options§

Open menu.

Delete all

Select,

press

§OK§

and confirm

with

§Yes§

. The list is cleared.

Press

and

hold

(idle status).

Sending SMS messages to an e-mail

address

If your service provider supports the SMS

to e-mail feature, you can also send your

SMS messages to e-mail addresses.
The e-mail address must be at the begin-

ning of the text. You must send the SMS to

the e-mail service of your SMS send cen-

tre.

Messaging

SMS

(mailbox, mailbox PIN)

New SMS

Enter the e-mail address. End

the entry with a space or colon

(depending on the service pro-

vider).

Enter the SMS text.

§Options§

Press the display key.

Send

Select and press

§OK§

E-mail

Select and press

§OK§

If the

number of the e-mail service is

not entered (page 46), enter

the number of the e-mail serv-

ice.

§Send§

Press the display key. The SMS

will be sent as soon as your

phone's fixed network connec-

tion is free.

Receiving an SMS

All received SMS messages are saved in

the incoming message list. Linked SMS

messages are displayed as

one

message. If

this is too long (it consists of more than 8

linked individual SMS messages) or if it

was not fully transmitted, it will be split

into several individual SMS messages.
Since an SMS remains in the list even after

it has been read, you should

regularly

delete SMS messages from the list

The display tells you if the SMS memory is

full.

Deleting SMS messages you no longer

require (page 43).

Incoming message list

The incoming message list contains:

All received SMS messages, starting

with the most recent

SMS messages that could not be sent

due to an error

SMS status messages, if the status

report is activated (page 41).

New SMS messages are signalled on all

Gigaset S45 handsets by the

icon in the

display, the flashing message key

and an advisory tone.

Opening the incoming message list with

the

key

Press.

Select mailbox if necessary and enter mail-

box PIN.

Summary of Contents for Gigaset S450 IP
















































































































































Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands

Siemens Gigaset S450 IP, User Manual

Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands