Siemens Gigaset S445, User Manual

Page: 52 / 79

49
Handset settings
Gigaset S440-445 / IM-engl / A31008-M1635-A661-1-7619 / settings_bs_hs.fm / 07.06.2005
Activating/deactivating
auto answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key
c
.
v
¢
Ð
¢
Handset
Auto Answer
Select and press
§OK§
(
‰
= on).
a
Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r
Select volume.
§Save§
Press display key if necessary
to save the setting perma-
nently.
If
t
is assigned a different function,
e.g. when toggling (page 17):
v
Open menu.
Volume Select and press
§OK§
.
Configure setting (see above).
Changing ringtones
u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 =
ˆ
) and
the "Crescendo" ring (6; volume
increases with each ring =
‰
).
u Ringtones:
You can select any sound from the
Sound Manager (page 50).
You can configure the following functions
with different ringtones:
u
Ext. Calls : For external calls
u
Internal Calls
: For internal calls
u Appointments : For set appointments
(page 52)
u
Alarm : For a pre-set wake-up call
(page 52)
u All : The same for all functions
How to set the ringtones for the base sta-
tion, see page 54.
Settings for individual functions
Set the volume and melody depending on
the type of ringing. For external calls, you
can choose to have the name of the caller
announced. This requires the correspond-
ing voice pattern to be recorded before-
hand (page 17).
v
¢
ï
¢
Ringer Settings
q
Select setting, e.g. Ext. Calls ,
and press
§OK§
.
r
Set volume (1–6).
s
Jump to the next line.
r
Select melody.
r
Activate or deactivate
Announce . Requirement: Call-
ing Line Identification
(page 15)
¤
Save changes (page 12).
In idle status, you can also open the menu
Ringer Settings
by pressing
t
briefly .