Siemens Gigaset S100, User Manual, Page: 95 / 137

91
Operating several handsets
Gigaset S100 /S150 / englisch / A31008-S100-J102-1-7619 / registration.fm / 23.06.2003
Activating the room monitor and entering the number to be called for the
first time
If the room monitor is activated, you can use
v
(open menu) to go straight to the room
monitor setting.
i
◆
If you use an external number for the room monitor call, remember to
inform the owner of the telephone.
◆
The alarm call to an external number is cut after about 90 seconds,
an alarm call to an internal number (handset) is unlimited .
◆
The active room monitor function considerably reduces the operating
time of the handset. You can leave the handset in the baby's room in
the charging unit so as to avoid flat batteries.
◆
The room monitor function can also be used in Walk and Talk mode.
Step 1: Open the entry field for the room monitor:
Open the menu.
[______________________________________________]
Add. Features
Select the menu item and confirm.
[______________________________________________]
Room Monitor
Confirm. The entry field appears.
Step 2: Activate room monitor:
In the
Room M.:
line select
On
.
Step 3: Enter the telephone number:
RRRRRRRRRRRRRRRRRRRRRRRR
Edit
Scroll to the
Call to:
line and press the display key.
The entry field for the telephone number appears.
either ... Entering an internal telephone number:
[RRRRRRRR]
INT
Press the display key.
Select the handset and confirm.
or ... Entering an external telephone number:
Enter the telephone number.
Press the display key to open the menu.
[______________________________________________]
Save Entry
Confirm. The entry is saved.
Step 4: Set the noise level sensitivity:
You can scroll to the
Level:
line if you want to set the
sensitivity for the noise level (
Low
or
High
).
[RRRRRRRRRRRRRRRRRRRRR]
Save
Press the display key. The room monitor function is
now activated.
OK
OK
OK
à
OK
i
◆
If you want to copy the external telephone number from the directory,
while in the entry field for the telephone number press the bottom of
the control key
s
(open directory), use s to select an entry and
confirm it with .
◆
If you enter an external telephone number, only the last 4 digits will
be shown in the display.
OK