Siemens Gigaset S100, User Manual, Page: 115 / 137

111
Appendix
Gigaset S100 /S150 / englisch / A31008-S100-J102-1-7619 / appendix.fm / 23.06.2003
Appendix
Maintenance
Simply wipe the base station and handset with a damp cloth (without solvents) or an
antistatic wipe. Never use a dry cloth. Otherwise there is a risk of static electricity build-
ing up.
Contact with liquid
If the handset should come into contact with liquid, on no account switch the device
on. Remove all batteries immediately.
Allow the liquid to drip out of the device, and then dab all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.
Questions and answers
If any questions occur to you while you are using your device, we are available 24 hours
a day at www.my--siemens.com/customercare . You will find the most frequently
asked questions and answers below.
!
What has happened if ... Possible cause Possible solution
... the display is blank? Handset is not switched on.
The batteries are flat.
Hold down the end call key
a
for about 2 seconds .
Charge or replace the batteries
(page 10).
… the handset fails to respond
to a key press?
The keypad protection is acti-
vated.
Hold down the hash key
R
for about 2 seconds
(page 11).
... "Base x" flashes in display? The handset is outside the base
station range.
The base station is not activated.
Move the handset closer to
base station.
Check the mains connector at
the base station (page 8).
... Base Search flashes in the
display?
The handset is set to Best Base ,
but there is no base station acti-
vated or in range.
Move the handset closer to
base station.
Check the mains connector at
the base station (page 8).
... an Internet address appears
in the display?
The automatic registration of
your handset has been inter-
rupted.
Register your handset manu-
ally (page 82).