
108
Connecting the base station to a PABX
Gigaset S100 /S150 / englisch / A31008-S100-J102-1-7619 / pabx.fm / 23.06.2003
Connecting the base station to a PABX
The following settings are only necessary if your PABX requires it,
please see your PABX
operating instructions
.
Dialling mode and flash time
The current setting is marked with
‰
Step 1: Change the dialling mode
You can choose the following dialling modes:
◆
Tone dialling (DTMF),
◆
Dial pulsing (DP),
◆
DTMF earth (country specific).
Step 2: Set the flash time
i
You cannot send or receive text messages (SMS) if your PABX does not
support telephone number transmission.
Open the menu.
[______________________________________________]
Base Settings
Select the menu item and confirm.
[______________________________________________]
Add. Features
Select the menu item and confirm.
[______________________________________________]
Dialling Mode
Confirm.
Select and confirm the dialling mode (marked
with
‰
).
Hold
down (return to idle).
OK
OK
OK
OK
Open the menu.
[______________________________________________]
Base Settings
Select the menu item and confirm.
[______________________________________________]
Add. Features
Select the menu item and confirm.
[______________________________________________]
Recall
Select the menu item and confirm.
Select and confirm the flash time (marked with
‰
).
Hold
down (return to idle).
OK
OK
OK
OK