Siemens Gigaset E500 User Manual Download Page 5

Page: 5 / 84

Overview of Gigaset E500 base

Gigaset E500/E500A / AUS / A31008-M2206-C401-1-7619 / overview.fm / 01.03.2011

Answering machine keys

Answering machine display

Lights up:

answering machine is activated. The number of saved messages is

displayed.

00 flashes:

the answering machine is recording a new message.

Flashes slowly:

there are new messages. The number of

new

messages is dis-

played.

99 flashes quickly:

the answering machine is full.

On/off key

: activate and deactivate answering machine.

Playback/Stop key

: play back messages from the answering machine or

cancel playback.

Forward key

: skip to next message.

Back key

: skip to beginning of the current or the previous message.

Delete key

: delete the current message during message playback or all

old messages in idle status.

Announcement key:

record, play back and delete a personal announce-

ment.

Press and

hold

: record announcement.

Press again to end recording.

Press

briefly

: play back announcement.

Delete announcement during playback by pressing

Volume keys

: adjust volume

(

= quieter;

= louder)

During message playback:

adjust loudspeaker volume.

While an external call is being signalled:

adjust ringer volume.

Please note

If the answering machine is being operated from a handset or if it is record-
ing a message (00 flashes), it cannot be operated from the base at the same
time.

Summary of Contents for Gigaset E500





















































































Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands

Siemens Gigaset E500, User Manual

Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands