Siemens Gigaset E500 User Manual Download

Page: 19 / 84

First steps

Gigaset E500/E500A / AUS / A31008-M2206-C401-1-7619 / first_steps.fm / 01.03.2011

After charging, remove the handset from the base and only
replace it when the batteries are fully discharged.

Please note

The handset is already registered with the base. If you have
purchased a

model with multiple handsets

, all handsets will

already be registered with the base. You do not need to regis-
ter the handset again.

After the first battery charge

and

discharge you may replace

your handset in its base after every call.

Always repeat the charging and discharging procedure if you
remove the batteries from the handset and reinsert them.

The batteries may warm up as they are charging. This is not
dangerous.

After a time the charge capacity of the batteries will decrease
for technical reasons.

Summary of Contents for Gigaset E500





















































































Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands

Siemens Gigaset E500, User Manual

Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands