25
ECO DECT
Gigaset E49H / IM1 eng / A31008-M2154-R101-1-4N19 / registr_sett.fm / 14.09.2010
V
e
rsion 4.1, 21
.11.2007
ECO DECT
You are helping to protect the environment
with your Gigaset.
Reducing energy consumption
By using a power-saving adapter plug, your
telephone consumes less power.
Reducing radiation (dependent on
base)
The radiation can only be reduced if your
base supports this function.
The transmission power of your telephone is
automatically
reduced depending on the
distance to the base.
You can reduce the radiation of the handset
and base even further by using Eco Mode or
Eco Mode+.
For further information,
please refer to your base user guide
.
Setting the alarm clock
Precondition:
The date and time have
already been set (
¢
page 11).
Activating/deactivating the alarm
clock and setting the wake-up time
v
¢
ì
¤
Change multiple line input:
Activation
Select
On
or
Off
.
Time
Enter the wake-up time in 4-digit
format.
Melody:
Select melody.
Volume:
Set the volume (1–6).
¤
Save the changes.
You will see the
ì
icon.
A wake-up call with selected ring tone
(
¢
page 29) is signalled on the handset.
The wake-up call sounds for 60 seconds.
ì
is
shown in the display. If no key is pressed, the
wake-up call is repeated twice at five minute
intervals and then switched off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze
mode)
Precondition
: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 min-
utes. After the second repetition
the wake-up call is deactivated
completely.
Using a handset as a
room monitor
If the room monitor is activated, a previously
saved destination number is called as soon
as a set noise level is reached. You can save
an internal or external number in your hand-
set as the destination number.
The room monitor call to an external
number is terminated after approximately
90 seconds. The room monitor call to an
internal number (handset) is terminated
after approximately 3 minutes (depending
on the base station). When the room moni-
tor is activated, all keys except the end call
key are locked. The handset's speaker is
muted.
When the room monitor is activated, incom-
ing calls to the handset are indicated
with-
out a ring tone
and are only shown on the
screen. The display and keypad are not illu-
minated and advisory tones are also turned
off.
www.InternetVoipPhone.co.uk | [email protected] | 0800 088 4846
