Siemens Gigaset C450 IP Owner'S Manual Download

Page: 26 / 106

VoIP telephony via the Gigaset.net

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / giganet.fm / 24.9.07

Example:

1. 2/50: Entry number/number of hits
2. Name of the entry, the name is displayed in

full, if necessary over several lines

You can scroll through the hit list with

If it has

not

been possible to find a

mat-

ching

entry, a corresponding message is

displayed. You have the following options:

Press the display key

§New§

to start a new

search.

Press the display key

§Change§

to change

the search criteria. The previously ente-

red name is copied and can be edited.

If there are

too many matching

entries

in the Gigaset.net directory, the message

Too many entries found!

is displayed instead

of a hit list.

Press the display key

§Refine§

to start a

refined search. The previously entered

name is copied and can be edited/

expanded.

Calling subscribers

Select the subscriber from the

hit list.

Press the talk key.

Viewing the subscriber's number

Select the subscriber from the

hit list.

§View§

Press the display key.

The Gigaset.net number and name will be

shown in full, if necessary using more

than one line.

Using other functions

Precondition:

The hit list is displayed.

(Select entry)

§Menu§

The following functions can be selected

with

Copy to Directory

Accept the number in the handset

directory. The number and name

(where appropriate abbreviated,

max. 16 characters) are accepted in the

directory.

Edit and save entry where appropri-

ate (S. 29).

The hit list is displayed again.

New search

Start a search with a new name (S. 24).

Refine search

You can use the refined search to limit

the number of hits for a previous

search. The name from the previous

search is copied and can be edited/

expanded.

Own information

See "Entering, editing and deleting

own entry"

2/50

Sand, Anna Magd
alena

§View§

§Menu

1
2

Please note:

– Connections to Gigaset.net are always esta-

blished via VoIP. Irrespective of which

default connection is set on your phone.

Pressing and holding

or pressing it

briefly and a "*" at the end of the number

have no effect.

– You can open the Gigaset.net directory and

establish connections, even if you have not

entered yourself in the Gigaset.net direc-

tory.

Please note:

If you select a Gigaset.net number from the

handset directory, the connection is automati-

cally established via VoIP.

Summary of Contents for Gigaset C450 IP











































































































Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands

Siemens Gigaset C450 IP, Owner'S Manual

Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands