Siemens Gigaset C450 IP Owner'S Manual Download

Page: 71 / 106

Appendix

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / appendix.fm / 24.9.07

Ver

on 4, 16.

09.20

You cannot make calls via VoIP.

The display

shows

Server not accessible!

First wait a few minutes. This is often a

short-term event that corrects itself after a

short time.

If the message is still displayed, proceed as fol-

lows:

Check whether your phone's Ethernet cable

is correctly connected to the router.

Check your router's cable connection to the

Internet.

Check whether the phone is connected to

the LAN. For example, set a ping command

on the phone (ping

<local IP address of

the phone>). It may be that no IP address

could be assigned to the phone or a perma-

nently set IP address is already assigned to

another LAN subscriber. Check the settings

on the router, you may have to activate the

DHCP server.

You cannot make calls via VoIP

. The display

shows

SIP registration failed!

First wait a few minutes. This is often a

short-term event that corrects itself after a

short time.

The message may still be displayed for the fol-

lowing reasons:
1. Your information for

Username

Authentica-

tion Name

and

Authentication Password

may

be incomplete or incorrect.

Check your information. In particular,

check your use of upper and lower case.

2. The general settings for your VoIP provider

are incomplete or incorrect (incorrect

server address).

Start the Web configurator and check

the settings.

You cannot establish a connection to the

phone with your PC's Web browser.

When establishing a connection, check the

local phone IP address that has been

entered. You can check the IP address on

your handset (page 49).

Check the LAN connections for the PC and

phone.

Check that your phone can be reached.

Transmit a ping command to your phone,

e.g. from your PC.

You have tried to reach the phone via a

secure http (https://...). Try again with

http://....

You cannot be reached for calls from the

Internet.

There is no entry for your phone in your

router's routing table. Check the settings

for the

NAT refresh time

(page 60).

Your phone is not registered with the SIP

service.

You have entered the wrong user ID or an

incorrect domain (page 57).

No firmware update or VoIP profile download

is carried out.
1. If

Not possible! Try later!

is displayed, the VoIP

line may be busy or a download/update is

already being carried out.

Repeat the process at a later time.

2. If

File corrupt!

is displayed, the firmware or

profile file may be invalid.

Please use only firmware and down-

loads that are made available on the

preconfigured Siemens server

(page 65) or at www.siemens.com/

gigasetcustomercare.

3. If

Server not available!

is displayed, the down-

load server may not be accessible.

The server is currently not accessible.

Repeat the process at a later time.

You have changed the preconfigured

server address (page 65). Correct the

address. If necessary, reset the base sta-

tion.

4. If

Transmission error XXX

is displayed, an

error occurred in the transmission of the

file. An HTTP error code is displayed for

XXX.

Repeat the process. If the error occurs

again, consult the Service department.

5. If

Please check IP settings!

is displayed, your

phone may not be connected to the Inter-

net.

Check the cable connections between

the phone and router and between the

router and the Internet.

Check whether the phone is connected

to the LAN, i.e. it can be reached at its IP

address.

Summary of Contents for Gigaset C450 IP











































































































Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands

Siemens Gigaset C450 IP, Owner'S Manual

Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands