Siemens FT2080 Operation Manual Download

Page: 11 / 180

Safety

Safety instructions

Building Technologies

A6V10380629_en--_a

Fire Safety

2015-09-10

2 Safety

2.1 Safety instructions

The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:

Symbol for danger

Signal word

Nature and origin of the danger

Consequences if the danger occurs

Measures or prohibitions for danger avoidance

Symbol for danger

This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.

Additional danger symbols
These symbols indicate general dangers, the type of danger or possible

consequences, measures and prohibitions, examples of which are shown in the

following table:

General danger

Explosive atmosphere

Voltage/electric shock

Laser light

Battery

Heat

Signal word

The signal word classifies the danger as defined in the following table:

Signal word

Danger level

DANGER

DANGER identifies a dangerous situation, which will result directly in death or

serious injury if you do not avoid this situation.

WARNING

WARNING identifies a dangerous situation, which may result in death or serious

injury if you do not avoid this situation.

CAUTION

CAUTION identifies a dangerous situation, which could result in slight to

moderately serious injury if you do not avoid this situation.

NOTICE

NOTICE identifies possible damage to property that may result from non-

observance.

Summary of Contents for FT2080





















































































































































































Search results

Summary of Contents for FT2080

Reviews:

Related manuals for FT2080

Brands by name

Popular brands

Siemens FT2080, Operation Manual

Search results

Summary of Contents for FT2080

Reviews:

Related manuals for FT2080

Brands by name

Popular brands